You have no items in your shopping cart.
Product Description
84-85 Toyota ext cab Pickup 2wd 4wd 3" BODY LIFT KIT
Please see the notes section below: 1,2,12,24
Since Performance Accessories body lifts do not alter or change the OEM suspension components, our customers continue to enjoy the much coveted quality factory ride that they have come to demand, as well as retaining the OEM warranty on the vehicle.
The primary reasons consumers choose to lift their vehicles is to allow for the installation of larger tires and wheels, thus increasing the off-road ability of the vehicle and the desired custom look the consumer is trying to achieve. Performance Accessories body lifts on average allows the consumer to increase tire size by two to three sizes.
Performance Accessories body lift kits include the highest quality, laser cut, CNC machined steel components, steering extensions, shift adaptors, body lift blocks, bushings and body mounts. All our hardware is zinc plated and or powder coated for corrosion protection and come with complete detailed installation instructions. We also offer urethane gap guards to fill the gap between the frame and the lifted body to give the consumer that completed OEM look.
- FRONT BUMPER BRACKETS ARE INCLUDED IN THIS KIT.
- DOES NOT FIT MODELS EQUIPPED WITH AUTOMATIC TRANSMISSION.
- OPTIONAL FRONT BUMPER RAISING KIT IS REQUIRED TO RAISE THE FRONT BUMPER (BKIT2/3)
- VEHICLES WITH 1 PIECE SOLID STEERING SHAFT MUST INSTALL LONGER AFTERMARKET STEERING SHAFT IN CONJUNCTION WITH BODY LIFT. SEE BORGESON UNIVERSAL.
- IT MAY BE NECESSARY TO DRILL THE FRONT TWO BODY BUSHING SLEEVES OUT TO 1/2" FOR NEW BOLT CLEARANCE.
- FRONT AND REAR BUMPER BRACKETS ARE INCLUDED IN THIS KIT.
- MODIFICATION TO THE FRONT FRAME HORNS WILL BE REQUIRED TO RAISE THE FRONT BUMPER USING THE BUMPER BRACKETS INCLUDED.
- WILL NOT FIT 2 WHEEL DRIVE WITH POWER STEERING.
- WILL NOT FIT 2 WHEEL DRIVE WITH STEERING GEAR BOX CLOSE TO FIREWALL (BEHIND FRONT AXLE).
- INSTALLATION ON MODELS EQUIPPED WITH V-8 WILL REQUIRE REPLACEMENT OF LOWER RADIATOR HOSE AND FAN.
- VEHICLES EQUIPPED WITH 6 CYL OR V-6 WILL REQUIRE REPLACEMENT OF LOWER RADIATOR HOSE TO AVOID CONTACT WITH SMOG PUMP.
- IT WILL BE NECESSARY TO DRILL OUT SOME OF THE BODY BUSHINGS TO ACCOMMODATE LARGER BOLTS.
- FRONT BUMPER BRACKETS WILL NEED TO BE MODIFIED FOR USE ON 2" KIT.
- WILL NOT FIT VEHICLE EQUIPPED WITH DIESEL ENGINE.
- STEERING EXTENSION INCLUDED.
- VEHICLES EQUIPPED WITH VORTEC V-6 MAY REQUIRE MODIFICATION OF THE AIR INTAKE OR AIR INTAKE HOSE.
- 3" KIT INCLUDES FRONT AND REAR BUMPER BRACKETS, 2" KIT INCLUDES FRONT BUMPER BRACKETS ONLY.
- REAR BUMPER CAN BE RAISED USING THE STOCK BUMPER BRACKETS.
- INSTALLATION ON VEHICLES WITH AIR CONDITIONING WILL REQUIRE MODIFICATION TO THE RADIATOR MOUNTING FLANGE.
- MANUAL TRANSMISSION MODELS WILL REQUIRE PART 3700 SHIFT EXTENSION (MAZDA TRANSMISSION ONLY).
- REAR BUMPER BRACKETS ARE TO ENHANCE APPEARANCE ONLY, BUMPER CANNOT BE USED FOR TOWING.
- KIT WILL NOT WORK ON VEHICLES EQUIPPED WITH MOVEABLE PEDAL PACKAGE.
- 95-03 ZR2 WILL REQUIRE MODIFICATION TO STEERING COLUMN MOUNTING FLANGE.
- GAP GUARDS AVAILABLE AND SOLD SEPARATELY FOR THIS APPLICATION.
- REAR BUMPER BRACKETS ARE AVAILABLE AND SOLD SEPARATELY FOR THIS APPLICATION.
- NO BUMPER BRACKETS ARE INCLUDED IN THIS KIT
- FRONT BUMPER CAN BE RAISED USING STOCK BUMPER BRACKETS.
- MANUAL TRANSMISSION MODELS REQUIRE A SHIFT LEVER EXTENSION OR LINKAGE BRACKET SOLD SEPERATLY.
- SEE OR-FAB JEEP PRODUCTS ALSO AVAILABLE.
- WILL NOT FIT VEHICLE EQUIPPED WITH GASOLINE ENGINE.
- S-15 BLAZER REAR BUMPER WITH FACTORY TOW HITCH CAN NOT BE RAISED
- REQUIRES CUTTING THE LOWER RADIATOR CORE SUPPORT AND INSTALLING NEW BRACKETS PROVIDED.
- 2006 MANUAL TRANSMISSION MODELS REQUIRE KIT # SE9627 SHIFT EXTENSION
- AUTOMATIC TRANSMISSION MODELS REQUIRE KIT # 9628 SHIFT EXTENSION BRACKET
- REQUIRES CUTTING THE FRONT BUMPER FASCIA TO ALLOW CLEARANCE FOR FRONT FRAM HORNS.
- CAN NOT USE TOW HOOKS
- SOME CUTTING / TRIMMING REQUIRED
